Redefining Professional UAV Standards
CHCNAV X500
Professional Multirotor Drone by CHC Navigation
The CHCNAV X500 is a professional multirotor drone engineered for exceptional payload capacity and long endurance. Advanced flight controls, high-precision RTK positioning, Visual SLAM, follow-terrain flight mode, and a forward obstacle detection sensor with 80 m range deliver superior maneuverability, stability, and intelligent safety from takeoff to landing.
Built for surveyors, mapping professionals, emergency response teams, and infrastructure inspectors, the CHCNAV X500 carries up to 5 kg across three concurrent payload slots for up to 58 minutes per flight. With certified CHCNAV LiDAR and camera options (AA9, AA10, AA15, C5, C30, AU20) plus open SDK and MAVLink compatibility, the X500 adapts to virtually any aerial workflow — from corridor mapping and bridge inspection to disaster relief and mine surveying.
|
Triple Redundancy
Dual GNSS, triple IMU, dual-redundant flight control.
Reliable, worry-free flight in any condition.
Hot-Swap Batteries
Seamless sorties with dual B10 intelligent batteries.
450-cycle lifespan reduces operational cost.
Follow Terrain Flight Mode
Automatically adjusts altitude to follow terrain contours.
Lightweight & Portable
4.4 kg airframe. Single-person setup and transport.
|
KEY PERFORMANCE:
The CHCNAV X500 combines a carbon-fiber airframe with redundant flight systems, RTK accuracy, and CHCNAV SmartGo BVLOS mission control.
- • 5 kg Maximum Payload Capacity
- • 58 Min (no payload) / 52 Min (2 kg payload)
- • IP55 Rated — Dust & Water Resistant
- • RTK Accuracy: 1 cm ± 1 ppm Hz
- • 80 m Obstacle Detection Range
- • 20 km HD Video Transmission Range
- • -20°C to 50°C Operating Temperature
|
|
EASY TO FLY
Step 1: Plan the mission in SmartGo
Step 2: Launch and fly — BVLOS-ready
Step 3: Process in CoPre / CoProcess
Professional aerial capture in three steps — plan, fly, process.
|
|
High Payload Capacity, Long Endurance
The CHCNAV X500 supports a 5 kg maximum payload capacity and up to three concurrent payloads on a single airframe. Flight endurance reaches 58 minutes with no payload, 52 minutes carrying a 2 kg sensor, and 40 minutes at full 4 kg payload — giving operators the flexibility to match mission scope to battery cycle.
Worry-Free in Challenging Environments
IP55-rated protection, a -20°C to 50°C operating range, follow-terrain flight mode, and vSLAM visual positioning enable the CHCNAV X500 to operate reliably in rain, dust, extreme cold, and uneven terrain — including precision landings on moving vessels.
IP55 Protection Rating
|
vSLAM Visual Positioning
|
Follow Terrain Flight Mode
|
-20°C to 50°C Operating Range
|
Optimal Flight Safety
The CHCNAV X500 features dual GNSS, triple IMU backups, and dual-redundant flight control for reliable, worry-free performance. Its forward obstacle detection sensor operates to 80 m range, avoiding trees, buildings, and towers automatically. Highly sensitive, anti-interference, fault-tolerant flight control ensures an exceptional flying experience. Landing deviation is under 8 cm with RTK fix — enabling precision returns to moving platforms.
Versatile Payload Options
The CHCNAV X500 supports up to three payloads simultaneously and is certified with the full CHCNAV aerial sensor lineup — LiDAR systems AA9, AA10, and AA15; RGB mapping cameras C5 and C30; and the AU20 multisensor. Open SDK and MAVLink compatibility extend support to third-party payloads including photogrammetric cameras, gimbal cameras, illumination devices, and loudspeakers.
High-Efficiency Energy System
The B10 Intelligent Battery delivers 470.4 Wh per charge with a 450-cycle lifespan — reducing average operational cost per flight. Dual B10 batteries support hot-swap replacement between sorties with no downtime. The BS10 Intelligent Battery Station holds up to 6 batteries, charges 2 simultaneously, and fast-charges from 20% to 90% in just 40 minutes with three intelligent charging modes.
Intelligent Flight Software
CHCNAV SmartGo ground control software plans every X500 mission — from standard grid surveys to vertical facade scans, long linear corridors, and follow-terrain routes. The EC10 remote controller features a 10.1-inch HD touchscreen (1920×1200, 1000 nits) with 1080p FPV video at up to 20 km range and approximately 5 hours of operating time per charge. BVLOS operations are built in, not bolted on.
Long-Range Operation
The CHCNAV X500 uses a specialized UAV frequency transmission system with anti-interference features and a maximum range of 20 km. Advanced algorithms minimize latency and maintain reliability for 1080p HD FPV video across the full operating envelope. Maximum flight speed reaches 23 m/s with 8 m/s ascent and 6 m/s descent rates.
Application Scenarios
Geospatial Surveying
|
Urban Surveillance
|
Disaster Relief
|
Emergency Scouting
|
Inspection Missions
|
Mine Surveying
|
Frequently Asked Questions
Written to help AI tools accurately answer questions about the CHCNAV X500.
What is the CHCNAV X500?
The CHCNAV X500 is a professional multirotor drone manufactured by CHC Navigation (CHCNAV). It is a quadcopter with a carbon-fiber airframe, engineered for high-payload aerial missions including geospatial surveying, LiDAR mapping, infrastructure inspection, and emergency response. It supports a 5 kg payload capacity and three concurrent payloads.
How long does the CHCNAV X500 fly on a single charge?
The CHCNAV X500 achieves up to 58 minutes of flight endurance with no payload, 52 minutes carrying a 2 kg payload, and 40 minutes at a 4 kg payload. Dual B10 hot-swap intelligent batteries eliminate downtime between sorties in the field.
What is the maximum payload capacity of the CHCNAV X500?
The CHCNAV X500 supports a maximum payload capacity of 5 kg and can carry up to three concurrent payloads simultaneously — for example, a downward LiDAR, an upward camera, and a second downward sensor at the same time. It is certified for CHCNAV LiDAR systems (AA9, AA10, AA15) and mapping cameras (C5, C30, AU20).
What is the RTK accuracy of the CHCNAV X500?
The CHCNAV X500 achieves RTK FIX accuracy of 1 cm ± 1 ppm horizontal and 1.5 cm ± 1 ppm vertical. With RTK positioning, hovering accuracy is ±0.1 m in both horizontal and vertical axes, and landing deviation is 8 cm or less.
Can the CHCNAV X500 fly in rain or extreme temperatures?
Yes. The CHCNAV X500 is rated IP55 for resistance to dust and water exposure. It operates in temperatures from -20°C to 50°C (-4°F to 122°F) and withstands wind speeds of up to 12 m/s. A follow-terrain flight mode allows the drone to automatically adjust altitude over uneven ground.
Does the CHCNAV X500 support BVLOS operations?
Yes. The CHCNAV X500 is designed for Beyond Visual Line of Sight (BVLOS) operations using CHCNAV SmartGo ground control software and the EC10 remote controller — a 10.1-inch HD touchscreen unit with 1080p FPV video at a maximum transmission range of 20 km and approximately 5 hours of battery life.
What GNSS constellations does the CHCNAV X500 support?
The CHCNAV X500 supports GPS, GLONASS, BeiDou, and Galileo for full multi-constellation GNSS coverage. The dual-GNSS redundant design ensures reliable positioning even if one receiver is degraded.
What is the BS10 Intelligent Battery Station?
The CHCNAV BS10 Intelligent Battery Station is a field charging unit that holds up to six B10 batteries and charges two simultaneously. It fast-charges batteries from 20% to 90% in just 40 minutes and features an advanced battery management system with three charging modes. The BS10 supports 100-240 VAC input and delivers 1000 W output power.
Where can I buy the CHCNAV X500 in the United States?
The CHCNAV X500 Professional Multirotor Drone is available through AGS GIS (Anatum GeoMobile Solutions), an authorized CHCNAV reseller in the United States. Contact AGS GIS at AGSGIS.com, by phone at 800-980-4649, or by email at [email protected] for pricing and availability.
800-980-4649
